Audac PMQ600 4-kanal 100V

DSP-forsterker, 4x600w RMS

Varenr: PMQ600
14 900,-eks mva.
BeskrivelseTeknisk infoTilbehørAlternativerSupport


  • Lightweight class-D amplifier
  • XLR input & linkthrough connections
  • Terminal block output connections
  • RS232 control
  • Dante expansion port
  • Advanced DSP and loudspeaker management
  • 2.5" LCD display with intuitive user interface
  • WaveDynamics™ speaker & set configurations


  • Retail
  • Public facilities
  • Corporate spaces
  • Clubs, bars, restaurants
  • Events
  • Live performances

The PMQ series are professional 100V quad channel power amplifiers, providing a new standard for premium sound 100V amplification in public address applications. Their advanced features and availability in different output powers provide an enormous flexibility for numerous applications. 

The PMQ600 is a four channel Class-D 100V power amplifier with an output power of 600 Watt for each channel. The WaveDynamics™ DSP processor combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. 

Acoustics can be optimized using the filters selectable between Low / High & Band Pass and the 7-Band equalizer both with adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection.

Configuration is made simple by the loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with a ‘bullet-proof’ loudspeaker protection. 

A great input flexibility and source compatibility is offered by the input selection matrix and the XLR and terminal block signal connections. System integration is made easy using the RS-232 control port. Optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.


System specifications
RMS Power4 x 600 W
FrequencyResponse (± 3 dB)50 Hz - 20 kHz
Signal / Noise< 0.05 dB
Crosstalk (@ 1 kHz)> 70 dB
PowerSupplySwitching mode
Operating230 ~ 240 V AC / 50 ~ 60 Hz
InputsSensitivity (1W/1m)-30 dB ~ +5 dB
Impedance10 k? balanced
Common mode rejection ratio70 dB
Damping factor> 200
ProtectionAmplifierDC Short circuit
Over heating
Over load
Signal limiting
AccessUser & Administrator level (Through password and USB-key protection)
CoolingTemperature controlled FAN
Operating temperature0° ~ 40° @ 95% Humidity
InputsConnectorXLR & 3-pin Euro Terminal Block (3.81 mm)
OutputsConnector4-pin Euro Terminal Block (Pitch - 5.08 mm)
Product Features
Dimensions482 x 88 x 420 mm (W x H x D)
Weight8.6 kg
Unit height2 HE
Teknisk info
 Stereo @ 4 Ohm   4 x 350 Watt
 Stereo @ 8 Ohm  4 x 220 Watt
 Bridge @ 8 Ohm  2 x 700 Watt
 THD + N  <0.05%
 Signal/Noise  >90dB
 Frequency Response  20Hz - 20kHz
 Power Supply  230 ~ 240 V AC / 50 Hz
 Dimensions (W x H x D)  482 x 88 x 420 mm
 Weight 8.15 kg
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.