Sennheiser MEB 114-S W m/PTT Hvit

Sennheiser MEB 114-S W m/PTT Hvit

Varenr: 505616
4 199,-eks mva.
BeskrivelseTeknisk infoDokumenter
Beskrivelse
The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Teknisk info

Technical Data

Colour black 505615
white 505616
nextel grey 505617
LED light ring: red / green
Dimensions 85 x 100 x 25 mm (WxDxH)
Connector clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
Frequency response 40 Hz – 20 kHz
Max. sound pressure level 140 dB
Transducer principle pre-polarized condenser microphone
Weight 291 g
Pick-up pattern cardioid
Nominal impedance 200 O
Phantom powering P 24 - P 48
Operating temperature -10 ° … +50 °C
Equivalent noise level 29 dB (A)
Equivalent noise level weighted as per CCIR 468-3 39 dB (CCIR)
Current consumption 5.3 mA
Output voltage Logic out: igh level output voltage > 2.4 V, low level output voltage < 0.4 V
Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
Acoustics boundary layer microphone
Dynamic range 111 dB (A)
Sensitivity 10 mV/Pa

What's in the box?

  • MEB 114 Microphone
  • Quickguide
  • Cable
Dokumenter
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.