Xilica RIO 2x2 I/O Dante wall box

2x XLR han + 2x XLR Hun

Varenr: R22-WP-X
6 996,-eks mva.
BeskrivelseTeknisk infoSupport
Beskrivelse

Xilica offers extensive support for the networking technology in its range. For example, the Rio Series of Dante-enabled I/O interfaces can be used to provide additional flexibility not only for Dante-enabled Neutrino-N processor models, but also as standalone interface devices with other Dante-enabled brands.

When the Rio Series is used in conjunction with Dante-enabled Xilica processors, the user has the advantage of being able to configure and manage all Dante devices from within the Xilica Designer software, removing the need to also use the Dante Controller software.

At the present time the Rio Series features six interface models. The newest Rio models include the R22-P, R44-P, R22-WP-X, and R22-WP-M models, which join the original Rio R1616-N and R1616-NX models. All models provide bi-directional Dante network audio transport – analog audio input, conversion, and transport over network cable and Dante network audio to analog audio breakout.

Available with a number of mounting options, the R22-P (2×2 I/O) and R44-P (4×4 I/O) models are 1/4 rack chassis size Dante interface devices. The front panel of both models provides Dip switch selection of Mic or Line input and 48V Phantom power on a per input basis, as well as an RJ45 Dante network audio connector with power and network status LEDs.

The rear of each model provides two or four analogue audio outputs on 3.5mm Euro connectors and a 12VDC external power supply connection. The external power supply is included, although it is also possible to power the device using PoE.

Elsewhere in the range, the R22-WP-X and R22-WP-M models are 2×2 analogue / 2×2 Dante I/O interface panels on a 2 gang sized flush or surface mount wall plate (surface mount back box included). The R22-WP-X wall plate model provides XLR analogue I/O connections only, while the R22-WP-M model provides a mix of XLR, dual RCA (L+R), and stereo 3.5mm (L+R) analogue I/O connections. Both models can be powered with a PoE switch or router, or via the included external power supply.

 

 

Teknisk info
Inputs and Outputs
Input Impedance: >10k Ohms
Output Impedance: 50 Ohms
Maximum Level: +20dBu
Type: Electronically balanced
 
Audio Performance
Frequency Response: +/- 0.1dB (20 to 30kHz)
Dynamic Range: 110dB typ (unweighted)
CMMR: > 100dB (50 to 10kHz)
Crosstalk: < -100dB
Distortion: 0.002% (1kHz @+4dBu)
 
Digital Audio Performance
Processor: 40-bit
Sampling Rate: 48kHz
Analog Converters: High Performance 24-bit
 
Front Panel Controls
Display: 2 x 24 Character Backlit LCD
Signal LEDs: 1 per channel
Status LED: Data
Buttons: Menu Controls
Dial Encoder: Embedded Thumb Wheel
 
Connectors
Analog Inputs: Phoenix Plug-in 3.81mm
Analog Outputs: Phoenix Plug-in 3.81mm
Ethernet: Standard CAT-5
Power: Standard IEC Socket
 
General
Power: 90-240 VAC (50-60Hz)
Dimensions: 19”x1.75”x9” (483x44x229 mm)
Weight: 11 lbs / 5 kg
EAN Code: 885799110037
Note: Specifications subject to change without notice
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.