Snow Frost Beam

W-DMX/RDM/3-35 zoom

Varenr: Frost Beam
23 196,-eks mva.
BeskrivelseTeknisk infoAlternativerSupport
Beskrivelse

The Frost Beam is a no-nonsense, high output beam effect that utilises a 250W white LED coupled together with a 180mm aperture lens giving you crisp mid-air FX and strong beams.

 

Unlike other beams on the market however you avoid the typical «hot-spot» effect due to a much higher spot evenness compared with traditional discharge bulbs typically used for beam fixtures.

 

Add in a zoom system with a range spanning from 3-35 degrees,1 color wheel, 2 gobo wheels; static and rotating, 5 facet prism, 5-100% linear iris, motorised focus and a frost filter, and what you are left with is a uniquely versatile fixture that weighs in at only 17kg. Control is managed through both 3-and 5-pin DMX with support for RDM and built in W-DMX from Wireless Solution in Sweden.

Teknisk info

 ?1 x 250W Osram Ostar white
?Powercon I/O, 3&5 Pin DMX/RDM
?User friendly interface
?3-35 degree zoom
?Universal power supply

Technical specifications

Light output:

?Lux @ 15m 16600
?LED type 1 x 250W Osram Ostar
?LED color white
?Drive current 4A
?Refresh rate: Selectable 1200MHz-25.000Hz
?Power 100~240VAC…50/60Hz
?Power consumption: 350W Max
?Control signal type: DMX/RDM/W-DMX
?Number of DMX channels 19(Standard),16(Basic)

Optics:

•Beam angle, 3-35°
•Rotating Gobo: 8 gobos + white, gobo-flow effect, gobo-shake, bi-directional rotation
•Static gobo: 12 gobos + white, gobo-flow effect, gobo shake
•Colorwheel: 7 dichroic-filters + white, rainbow-flow effect
•Prism: 1 x 5-facet w/bi-directional rotation, speed adjustable
•Iris: 5-100% linearly adjustable with macro
•Focus: motorised linear focus
•Zoom: motorized linear focus:
•1 frost filter


Dimensions:

•355 x 250 x 609 mm
•Weight 17 kg
•Housing material: Flame retardant plastic
•Color: Black

Connections:

•DMX: 3 & 5 pin in/out
•Power: Powercon true 1 in/out
•Forced convection cooling
•Operating temperature: 0 – +45 grader Celsius
•Ingress protection IP20, dry location

•Certification: CE, MET

Alternativer
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.