Audac AMP203 2x30w forsterker

Dante, PoE, Audac Touch2, DSP, RS-485,

Varenr: AMP203
5 995,-eks mva.
BeskrivelseTilbehørSupport
Beskrivelse

Highlights

  • Compatible with AUDAC Touch™ 2
  • Compatible with TouchLink™
  • Advanced DSP and loudspeaker management
  • Dante & AES67 digital audio input
  • PoE 802.3bt (and lower) compatible
  • Ethernet & RS-485 control possibilities

Applications

  • Education
  • Corporate spaces
  • Retail
  • Residential

The AMP203 is a revolutionary small amplifier, featuring network input through Dante or AES67 providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency, while allowing all other data to be connected on the same network.

The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged.

Using PoE (Power over Ethernet) this extremely power-efficient amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum.

The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available like the MBS1xx series, which allow it to be mounted under a desk, in a closet, on the wall, on top of a dropped ceiling or to a 19" equipment rack. This proves that the AMP203 is the perfect solution for compact to medium-sized applications in corporate, hospitality or retail environments.

Decentralize your system

Thanks to the multifunctional use of the AMP203 in combination with the AUDAC Touch™ 2 app it is possible to create a decentralized multi-zone system. By simply connecting the AMP203 to the local network and connecting the loudspeakers, a new zone can be introduced to your system.

DSP functionalities coming soon in AUDAC Touch™ 2

By the end of Q2 2020, various DSP functionalities will be implemented. This will allow all configurations to be made in AUDAC Touch™ or via RS485 and Ethernet, making the AMP203 a fully-fletched 2 x 30W amplifier.

   

 

System specifications
RMS Power@ 2 ? Bridge1 x 60 W
THD+N (@ 1 kHz)< 0.015%
Crosstalk (@ 1 kHz)< -98 dB
Efficiency> 70%
CoolingConvection cooled
ControlRS-485
TCP/IP
PowerPoE 802.3bt
Supply24 V DC
InputsOtherType1 x Ethernet
RS-485
Dante/AES67 (4 channels)
ConnectorRJ45
ProtectionOver heating
Over load
DC Short circuit
Signal limiting
OutputsType1 x Stereo Loudspeaker
Connector4-pin Euro Terminal Block (Pitch - 5.08 mm)
PowerConsumption80 W (max.)
Nominal (1/8 MUP)10.6 W
RMS Power@ 4 ? Stereo2 x 30 W
@ 8 ? Bridge1 x 30 W
@ 8 ? Stereo2 x 30 W
@ 4 ? Bridge1 x 60 W
Product Features
Dimensions108 x 44 x 165 mm (W x H x D)
Weight

0.7 kg

Tilbehør
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.