Her er du nå: First Audio AS   >   LYD   >   Høyttalere   >   Søylehøyttaler   >   K-Array Vyper-KV52 II
K-Array Vyper-KV52 II Ultraflat Line-array speaker Black K-Array Vyper-KV52 II Ultraflat Line-array speaker Black

K-Array Vyper-KV52 II

Ultraflat Line-array speaker Black

Varenr: KV52 II
14 300,-eks mva.
BeskrivelseTeknisk infoDokumenter
Beskrivelse

Vyper-KV52 II is an ultra-flat passive loudspeaker comprised of eight 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, with a new frameless chassis designed for very elegant discreet installations, perfect for a clean bracketless application on any flat surface.

The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.

Two different values of impedance (16O – 64O) allow to connect up to 16x Vyper-KV52 II loudspeakers at 64O impedance to the same 4O amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.

All Vyper-KV52 II components are designed by the K-array R&D department and are custom-made under the K-array quality control system in Italy.

Teknisk info

Specifications

General

  • Type:  

    Passive line array loudspeaker

  • Transducers:  

    8x 1” Neodymium magnet woofers

  • Frequency Response:  

    150 Hz - 18 kHz (-6 dB)

     (1)

  • Max SPL:  

    114 dB peak

     (2)

  • Rated Power:  

    150 W

  • Coverage:  

    V. 10° | H. 140°

  • Connectors:  

    2PIN euroblock connector (included)

  • Nominal Impedance:  

    16 O - 64 O selectable

Handling and Finishes

  • Dimensions (W x H x D):  

    40 x 500 x 22 mm (1.6 x 19.7 x 0.9 in)

  • Weight:  

    0.8 kg (1.54 lb)

  • Material:  

    Aluminum

  • Colors:  

    Black, White, Custom RAL

  • Finishes:  

    24K Gold, Polished, Brushed

Regulations

  • IP Rating:  

    IP65

  • (1) With dedicated preset
  • (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m

  • Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers.
    New materials and design are introduced into existing products without previous notice.

Dokumenter
ProdusentProduktSupport
Copyright © 2024 FirstAudio AS - All rights reserved Forretningssystem og nettbutikkløsning levert av Multicase™ Norge AS
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.