KGEAR GP12A Active Array System 12" sub + column

KGEAR GP12A Active Array System

12" sub + column

Varenr: GP12A

36 120,-eks mva.

Beskrivelse

GP12A

12" Subwoofer + 16x2" Modular Column System (Active)

GP12 is a portable high performance Sub + Column system that features a 12” subwoofer with a ferrite magnet and a modular column with 16x2” drivers with neodymium magnets.

The active version has a 4x750W RMS Class-D amplifier built-in and is capable of driving up to 3 full GP12 passive systems at the same time. The column divers feature an alternating angle pattern that increases the dispersion up to 140° on the horizontal plane to provide a very immersive sound field while assuring a long throw and a narrow vertical dispersion. GP12 comes with 4 factory presets to adapt to any needs.

Thanks to the quick setup and its compact form factor, GP12A/GP12 is an incredibly effective solution for small and medium temporary and fixed applications where performance to size ratio is key, such as events of any kind, small stages, trade shows, broadcast and corporate.

Teknisk info

Tech specs

GENERAL

Power Handling: 600W subwoofer + 500W satellite
Impedance: 8O subwoofer + 16O each segment
Frequency Range: 37Hz – 20KHz (-6dB average)
Maximum SPL(1): 122dB peak
Coverage: V.20° - H.140°

TRANSDUCERS

Subwoofer: 12” ferrite magnet
Mid High Frequency: 2 modules with 8x2” neodymium magnet

AUDIO I/O

Analog balanced I: 2 x Combo jack-XLR female line
Analog power O: 1 x Speakon to drive a GP12 Passive System in a stereo configuration

AUDIO CONTROLS

Volume potentiometer | RJ45 connector | DSP can be remotely controlled via an Ethernet connection through Powersoft ArmoniaPlus Software

AMPLIFIER

Type: 4-channel Class-D audio amplifier
Power: 4x 750W @4ohm
AC input: 100-240V AC @50-60Hz (Powercon connector)
Max power consumption: 500W Rated Load (1/8 Max Power)
Protections: Thermal Protections (Power limiting - Thermal Shutdown), Short-circuit/overload output protections, stationary high frequency protection, peak limiter, RMS limiter, frequency dependent RMS limiter, Clip limiter.

PHYSICAL OVERVIEW

SUBWOOFER

Width: 405mm (15.94in)
Height: 445mm (17.51in)
Depth: 430mm (16.92in)
Weight: 20kg (44.1lbs)
Material: plywood
Rating: IP41

SATELLITE

Width: 85mm (3.34in)
Height: 1610mm (63.38in)
Depth: 105mm (4.13in)
Weight: 4.5kg (9.92lbs)
Material: ABS
Rating: IP54

ACCESSORIES
GP18-BASE: Floor stand for GP18/GP18A GP12/12A columns (optional)

Alternativer