QUATTROCANALI 4804 DSP+D

4x1200W Amplifier Platform with DSP and Dante™

Quattrocanali 4804 offers the traditionally amazing sound quality and reliability of all Powersoft products.

The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption in any load and usage condition. Quattrocanali features the lowest thermal dissipation in the industry, reducing the need for external cooling devices.

Quattrocanali is designed to operate with lo-Z (from 2 O) and 70V/100V distributed lines or any mix of the two.

DSP+D versions of the Quattrocanali grant in-depth control and monitoring via Armonìa, tailoring the sound and managing the system can be done by a remote, decentralized location.

This Amplifier Platform can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS.

General
Number of channels	4

Output power	Single channel mode			Distributed line*		Bridge mode
	2 O	4 O	8 O	70V	100V	4 O	8 O
	1500 W	1200 W	1200 W	1200 W	1200 W	3000W	2400W
Max output voltage / current	140 V_peak / 45 A_peak

AC Main Power
Power supply	Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement	100-240 V ±10%, 50-60 Hz
Operating voltage	90 V - 264 V
Power consuption**	115 V				230 V
Idle	32.3 W		0.45 A		32.4 W		0.33 A
1/8 of max output power @ 4 O	850 W		9.16 A		826.8 W		5.02 A
1/4 of max output power @ 4 O	1718 W		15.96 A		1651 W		9.41 A

Thermal
Operating temperature range		-10° - 45° C - 14° - 113° F
Thermal dissipation**	115 V				230 V
Idle	110.3 BTU/h		27.8 kcal/h		110.6 BTU/h		27.9 kcal/h
1/8 of max output power @ 4 O	853.5 BTU/h		215.1 kcal/h		768.1 BTU/h		193.6 kcal/h
1/4 of max output power @ 4 O	1768.5 BTU/h		445.7 kcal/h		1539.8 BTU/h		388.0 kcal/h

AUDIO
Frequency response	20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 O
S/N ratio	> 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation	> 70 dB @ 1kHz
THD+N	0.2% from 0.1 W to full power (typically < 0.05%)
IMD	< 0.1% from 0.1 W to full power (typically < 0.05%)
Input impedance	20 kO balanced
Slew rate	> 50 V/µs @ 8O, input filter bypassed
Damping factor	> 500 @ 20-100 Hz

DSP
AD Converter	24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005 % THD+N
DA Converter	24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range - 0.003 % THD+N
Internal precision	32 bit floating point
Memory/presets	128 MB (RAM) plus 512 MB fash for presets /
Latency	2.5 ms fixed latency architecture
Input equalizer	Raised-cosine, custom FiR, parametric iiR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover	linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay	2 s (input) + 100 ms (output) for time alignment
Input EQ
Output EQ
Limiters	TruePower™, RMS voltage, RMS current, Peak limiter
Damping control	Active DampingControl™ and Liveimpedance™ measurement

Front panel
Connectors
AC main	1 x IEC C20 connector - 20 A max (region-specific power cord provided)
Audio signal input	1 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Signal input – MAIN
Alarm	1 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Alarm connector 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Alarm connector
Network/data	1 x Rj45 socket - RS485 data connection (non-DSP version) 1 x Rj45 socket - DANTE®

Construction
Dimensions (L x H x W)	483 mm x 44.45 mm x 360 mm (19.0 in x 1.8 in x 14.2 in)
Weight	7 kg (15.4 lb)