Electrical
AC power:
120-240 V nominal, 50/60 Hz
Power Consumption:
73 W (all effects static, zero light output)
Power supply unit:
Auto-ranging electronic switch-mode
Half-cycle RMS inrush current at 230 V, 50 Hz:
16.6 A
Typical Power and Current
Typical power data, extended color mode, all LEDs at 100% intensity:
100 V, 60 Hz: 4.8 A, 480 W, PF 0.99
120 V, 60 Hz: 4.0 A, 480 W, PF 0.99
208 V, 60 Hz: 2.4 A, 480 W, PF 0.97
230 V, 50 Hz: 2.1 A, 480 W, PF 0.97
240 V, 50 Hz: 2.0 A, 480 W, PF 0.97
Typical power data, calibrated mode, full intensity at 6500 K:
100 V, 60 Hz: 3.7 A, 370 W, PF 0.99
120 V, 60 Hz: 3.1 A, 370 W, PF 0.99
208 V, 60 Hz: 1.9 A, 370 W, PF 0.96
230 V, 50 Hz: 1.7 A, 370 W, PF 0.96
240 V, 50 Hz: 1.6 A, 370 W, PF 0.95
Figures are typical, not maximum. Measurements made at
nominal voltage with all LEDs at full intensity. Allow for a deviation
of +/- 10%. PF = power factor
Thermal
Cooling:
Combined convection and forced air (temperature-regulated,
low noise, user-definable levels) Maximum surface temperature, steady
state, Ta=40° C: 75° C (167° F)
Maximum ambient temperature (Ta max.):
40° C (104° F)
Minimum ambient temperature (Ta min.):
5° C (41° F)
Total heat dissipation (calculated, +/- 10%):
2000 BTU/hr.
Approvals
Global CB Certification/IECEE:
IEC 60598-2-17 (IEC 60598-1)
EU safety:
EN 60598-2-17, EN 62471, EN62493
EU EMC:
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety:
UL 1573
US EMC:
FCC Part 15 Class B
Canadian safety:
CSA C22.2 No. E598-2-17
Canadian EMC:
CAN ICES-003(B)/NMB-003(B); CAN ICES-005 (B) / NMB-005 (B)
Australia/NZ:
RCM
Included Items
Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
Related Items
Martin Companion Cable:
P/N 91616091
Martin Companion Software Suiter (including firmware uploader) Free download from www.martin.com
Accessories
SIP Packaging MAC Allure™:
P/N 91611860
Three-unit flight case for MAC Allure™:
P/N 91515052
Cables, 16 A, for connection to power in chains:
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Cables, 16 A, for relaying power in chains:
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female):
P/N 91611789
Connectors:
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
(*Please order SIP variant fixtures to obtain the required SIP foam flight case inserts)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler Clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007