Varenummer:
KV52X II
Vyper-KV52 II is an ultra-flat passive loudspeaker comprised of eight 1” neodymium magnet transducers each, housed in an elegant yet sturdy aluminum chassis, with a new frameless chassis designed for very elegant discreet installations, perfect for a clean bracketless application on any flat surface.
The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker.
Two different values of impedance (16O – 64O) allow to connect up to 16x Vyper-KV52 II loudspeakers at 64O impedance to the same 4O amplifier output channel, which eliminates the need for 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory.
All Vyper-KV52 II components are designed by the K-array R&D department and are custom-made under the K-array quality control system in Italy.
Specifications
General
Type:
Passive line array loudspeaker
Transducers:
8x 1” Neodymium magnet woofers
Frequency Response:
150 Hz - 18 kHz (-6 dB)
(1)
Max SPL:
114 dB peak
(2)
Rated Power:
150 W
Coverage:
V. 10° | H. 140°
Connectors:
2PIN euroblock connector (included)
Nominal Impedance:
16 O - 64 O selectable
Handling and Finishes
Dimensions (W x H x D):
40 x 500 x 22 mm (1.6 x 19.7 x 0.9 in)
Weight:
0.8 kg (1.54 lb)
Material:
Aluminum
Colors:
Black, White, Custom RAL
Finishes:
24K Gold, Polished, Brushed
Regulations
IP Rating:
IP65
- (1) With dedicated preset
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Spesifikasjoner
| Produsent | K-Array |