Varenummer:
KFC26W
Specifications
General
Type:
Point source
Transducers:
6" neodymium magnet woofer
2" neodymium magnet woofer (1.1" dome tweeter, in the KF26C models)
6" passive radiatorFrequency Response:
50 Hz - 19 kHz (-6 dB)
(1)Sensitivity (1W/1m):
90 dB
Max SPL:
115 dB (peak)
(2)Rated Power:
160 W
Coverage:
V. 90° | H. 90°
V. 140° | H. 140° (only for the KF26C and KFC26M models)Connectors:
4PIN euroblock connector (included)
2PIN euroblock connector (included, only for the KF26C and KF26CM models)Nominal Impedance:
8 O / 32 O selectable
(only 8O for the KF26C and KF26CM models)
Handling and Finishes
Dimensions (W x H x D):
180 x 350 x 118 mm (7.1 x 13.8 x 4.6 in) (3)
(3)Weight:
6.5 kg (14.3 lb)
Material:
Stainless Steel
Colors:
Black, White, Custom RAL
Finishes:
24K Gold, Polished, Brushed
Marine Treatments:
? ONLY FOR KFC26M models - An epoxy-based CATHAPHORESIS treatment is applied by electroplating, ensuring a total coating with homogeneity of constant thickness in order to give metal surfaces considerable resistance to chemical and environmental corrosion. A special K-KUIP is included as well.
(4)
Regulations
IP Rating:
IP64
IP65 (KF26CM or with K-KUIP accessory)(5)
- (1) With dedicated preset.
- (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
- (3) Removable rubber feet not included in measures
- (4) Only for the Marine Customization (KFC26M, KFC26MW)
- (5) More complete water protection with K-KUIP accessory.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Spesifikasjoner
| Produsent | K-Array |