Varenummer:
506614
SL Boundary Set DW omfatter den trådløse mikrofonen SL Boundary 114-S DW, SL DW rackmottaker og alt som trengs for bruk og installasjon. SL Boundary 114-S DW er optimalisert for overføring av tale i konferanserom. SL Boundary 114-S DW er helt uavhengig av kabler, noe som gir svært fleksible bruksmåter. SL Boundary SET DW har induktiv lading, og SL Boundary 114-S DW kan lades enten trådløst eller via USB. Den trådløse strømsenderen CHG Qi 2W for to mobile enheter kan leveres separat. SL Boundary 114-S DW har egne lysdioder for klar og tydelig visning av batteristatus. Settet leveres med oppladbare accupacks med opptil 12 timers driftstid. Alle enhetene kan monitoreres og styres med Sennheiser Control Cockpit.
Technical Data
_x000D_System
_x000D_| Frequency response | _x000D_20 to 20.000 Hz | _x000D_|
|---|---|---|
| Dynamic range | _x000D_> 128 dB (A) | _x000D_|
| THD, total harmonic distortion | _x000D_typ. < 0,1 % | _x000D_|
| Audio sampling | _x000D_24 bit/48 kHz | _x000D_|
| Signal-to-noise ratio | _x000D_= 109 dB (A) | _x000D_|
| RF frequency range | _x000D_2,400 to 2,483.5 MHz | _x000D_|
| Modulation | _x000D_GFSK with back channel | _x000D_|
| Transmission method | _x000D_TDMA, time diversity, frequency diversity, fast switching antenna diversity | _x000D_|
| Latency | _x000D_3.9 ms | _x000D_|
| Audio codec | _x000D_APT-X Live | _x000D_|
| Operating temperature | _x000D_– 10 °C to +55 °C | _x000D_|
| Storage temperature | _x000D_– 20 °C to +70 °C (The temperature range is influenced by the battery characteristics) | _x000D_|
SKM D1
_x000D_| Frequency response | _x000D_50 to 20,000 Hz | _x000D_|
|---|---|---|
| RF output power | _x000D_adaptive, up to 100 mW, 10 mW fix (country-specific) | _x000D_|
| Display | _x000D_LCD | _x000D_|
| Weight | _x000D_approx. 280 g incl. microphone head | _x000D_|
| Input sensitivity | _x000D_automatic sensitivity adjustment | _x000D_|
| Battery Specification | _x000D_2 x AA size battery (1.5 V), Operating time: typ. 6 h | _x000D_|
| Accupack | _x000D_BA 10 (Li-Ion, 3.7 V), Operating time: typ. 11 h (optional accessory) | _x000D_|
EM D1
_x000D_| RF sensitivity | _x000D_<-90 dBm | _x000D_|
|---|---|---|
| RF output power | _x000D_Back channel 10mW/100mW (country-specific) | _x000D_|
| Audio output | _x000D_Mic/line level switch –12 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu | _x000D_|
| Low-cut filter | _x000D_at 120 Hz | _x000D_|
| Equalizer | _x000D_7-band graphic equalizer | _x000D_|
| Automatic gain control (AGC) | _x000D_compression/expansion with automatic make-up gain function | _x000D_|
| Display | _x000D_OLED | _x000D_|
| Connection | _x000D_XLR/¼" (6.3 mm) jack | _x000D_|
| Antenna connector | _x000D_2 x Rev-SMA | _x000D_|
| Network socket | _x000D_RJ45 | _x000D_|
| Network protocol | _x000D_Media Control Protocol, UDP IPv4 (DHCP, Manual)/IPv6 | _x000D_|
| Power supply | _x000D_12 V DC hollow jack | _x000D_|
| Current consumption | _x000D_350 mA | _x000D_|
| Weight | _x000D_approx. 824 g | _x000D_|
SK D1
_x000D_| RF output power | _x000D_adaptive up to 100mW, 10mW fix (country-specific) | _x000D_|
|---|---|---|
| Connection | _x000D_3.5 mm jack socket, lockable | _x000D_|
| Weight | _x000D_approx. 85 g | _x000D_|
| Input sensitivity | _x000D_automatic sensitivity adjustment | _x000D_|
| Battery Specification | _x000D_2 x AA size battery (1,5V), Operating time: typ. 6 h | _x000D_|
| Accupack | _x000D_BA 30 (Li-Ion, 3.7V), Operating time: typ. 11 h | _x000D_|
| Microphone | _x000D_Frequency response: 50 to 20,000 Hz | _x000D_|
| Max. input level: 2.2 V RMS | _x000D_||
| Line | _x000D_Frequency response: 20 to 20,000 Hz | _x000D_|
| Max. input level: 3.3 V RMS | _x000D_||
| Input impedance | _x000D_1 M? | _x000D_|
What's in the box?
_x000D_- _x000D_
- EM-D1 rackmount receiver _x000D_
- SKM-D1 handheld transmitter _x000D_
- MZQ microphone clamp _x000D_
- NT-12 power supply _x000D_
- Transport Case _x000D_
- User Manual
Spesifikasjoner
| Produsent | Sennheiser |