2012637

/search

FirstAudio2016

Fluke MT-8200-60-KIT Lan-tester

Fluke MT-8200-60-KIT Lan-tester

DAP Audio dap

Varenr: 112527

3 996,-eks mva.

Beskrivelse

Fluke Networks MT-8200-60-KIT IntelliTone™ Pro 200 Toner and Probe Kit

Key features

Locates cables safely and effectively on active networks
Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
Verifies twisted pair installation with end to end continuity test
IntelliTone™ digital toning eliminates noise and false signals
SmartTone analog toning isolates individual wire pairs

General specifications
Operating temperature	32 °F to 104 °F (0 °C to 40 °C)
Storage temperature	-4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation)	95 % (50 °F to 95 °F; 10 °C to 35 °C) 75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
Vibration	Random, 2 g, 5 Hz-500 Hz
Shock	1 m drop test
Safety	EN 61010-1, Category: None
Altitude	3000 m
EMC	EN 61326-1, FCC Part 15 B
Battery type and life	9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications	Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200.

Toner specifications
Dimensions	5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display	LED
Control	Thumbwheel switch
Toner interface	Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
Toner frequency	IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs
Ouptut power	5 V p-p
Auto power down	Turns off automatically after 2 1/2 hours of inactivity

Probe specifications
Dimensions	8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display	(8) LED indicators, Sync LED indicator
Audio	IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal
Control	Thumbwheel switch, volume control wheel
Tone detection	Detects IntelliTone™ digital signal for Locate, Isolate, and Cable Map Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interface	Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling.
Auto power down	Turns off automatically after 1 hour of inactivity

Dokumenter

Varen er på lager.

Varen er bestilt fra leverandør og leveringsdato er bekreftet.

Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.

Varen må bestilles fra leverandør.

Varen befinner seg på fjernlager.

Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.

Varene bestilles fra vår leverandørs lager.

Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.