Fluke MT-8200-60-KIT Lan-tester

Fluke MT-8200-60-KIT Lan-tester

Varenr: 112527
3 996,-
Logg inn for å se din forhandlernetto.Søk om å bli forhandler her.
Beskrivelse
Beskrivelse

Fluke Networks MT-8200-60-KIT IntelliTone™ Pro 200 Toner and Probe Kit

Key features

  • Locates cables safely and effectively on active networks
  • Kit includes IntelliTone™ toner, probe, adapters, patch cables, and test leads
  • Verifies twisted pair installation with end to end continuity test
  • IntelliTone™ digital toning eliminates noise and false signals
  • SmartTone analog toning isolates individual wire pairs
General specifications
Operating temperature32 °F to 104 °F (0 °C to 40 °C)
Storage temperature-4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation)95 % (50 °F to 95 °F; 10 °C to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
VibrationRandom, 2 g, 5 Hz-500 Hz
Shock1 m drop test
SafetyEN 61010-1, Category: None
Altitude3000 m
EMCEN 61326-1, FCC Part 15 B
Battery type and life9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
ApplicationsCopper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200.
Toner specifications
Dimensions5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
DisplayLED
ControlThumbwheel switch
Toner interfaceMain Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
Toner frequencyIntelliTone™ signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs
Ouptut power5 V p-p
Auto power downTurns off automatically after 2 1/2 hours of inactivity
Probe specifications
Dimensions8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display(8) LED indicators, Sync LED indicator
AudioIntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal
ControlThumbwheel switch, volume control wheel
Tone detectionDetects IntelliTone™ digital signal for Locate, Isolate, and Cable Map
Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interfaceMain Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling.
Auto power downTurns off automatically after 1 hour of inactivity