K-Array Anakonda KAN200W+8 Ultraflat Line-array speaker White 8Ohm

K-Array Anakonda KAN200W+8

Ultraflat Line-array speaker White 8Ohm

Varenr: KAN200W+8
Logg inn for å se din forhandlernetto.Søk om å bli forhandler her.
BeskrivelseTeknisk infoAlternativer
Beskrivelse

Lightweight and able to take any form, the Anakonda-KAN200+8 is a truly revolutionary speaker. These loudspeakers are 2 meters long with 16 x 1" drivers delivering up to 108 dB, rated at 300W@8O impedance. Integrated male and female Speakon NL4 connectors hide all connections inside the body of the speaker. And by using two amplifier channels with the dedicated K-ANLINK accessory, you can extend your Anakonda system to up to 4 units – 8 meters – which creates an elegant, seamless line of continuous sound.

Its dedicated presets work on a wide frequency range and can be used as an audio system in combination with K-array subwoofers.

Teknisk info
 

Specifications

General

  • Type Line array
  • Transducers 16 x 1" neodymium magnet woofer
  • Frequency Response (1) 150 Hz – 18 kHz (-6 dB)
  • Maximum SPL (2) 108 dB (peak)
  • Rated Power 300 W
  • Coverage V. 10° | H. 140°
  • Connectors SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)
  • Nominal Impedance 8 O

Handling and Finishes

  • Dimensions (W x H x D) 2000 (±20mm) x 56 x 35 mm (79.5 x 2.2 x 1.4 in)
  • Weight 1,9 kg (4.2 lb)
  • Material PVC/Neoprene
  • Color Black, White

Regulations

  • IP Rating IP64
  • Notes for data:
    (1) With dedicated preset.
    (2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m.

    Passive loudspeakers require dedicated presets loaded on K-array amplifiers.
    New materials and designs are introduced into existing products without previous notice.

Alternativer