K-Array Anakonda KAN200W Ultraflat Line-array speaker White 64Ohm

K-Array Anakonda KAN200W

Ultraflat Line-array speaker White 64Ohm

Varenr: KAN200W
Logg inn for å se din forhandlernetto.Søk om å bli forhandler her.
BeskrivelseTeknisk infoAlternativer
Beskrivelse

Lightweight and able to take any form, the Anakonda-KAN200 is a truly revolutionary speaker. These loudspeakers are 2 meters long with 8 x 1" drivers that deliver a max power of 300W at 64O impedence. Integrated male and female Speakon NL4 connectors hide all connections inside the body of the speaker. And by using two amplifier channels with the dedicated K-ANLINK accessory, you can extend your Anakonda system to up to 32 units – 64 meters – which creates an elegant, seamless line of continuous sound.

Its dedicated presets work on a wide frequency range and can be used as an audio system in combination with K-array subwoofers.

Teknisk info

Specifications

General

  • Type Line array
  • Transducers 8 x 1" neodymium magnet woofer
  • Frequency Response (1) 150 Hz – 18 kHz (-6 dB)
  • Maximum SPL (2) 102 dB (peak)
  • Rated Power 150 W
  • Coverage V. 10° | H. 140°
  • Connectors SpeakOn NL4 1+ 1- (signal); 2+ 2- (through)
  • Nominal Impedance 64 O

Handling and Finishes

  • Dimensions (W x H x D) 2000 (±20mm) x 56 x 35 mm (79.5 x 2.2 x 1.4 in)
  • Weight 1,4 kg (3.1 lb)
  • Material PVC/Neoprene
  • Color Black, White

Regulations

  • IP Rating IP64
  • Notes for data:
    (1) With dedicated preset.
    (2) Maximum SPL is calculated using crest a signal with factor 4 (12 dB) measured at 8 m then scaled at 1 m.

    Passive loudspeakers require dedicated presets loaded on K-array amplifiers.
    New materials and designs are introduced into existing products without previous notice.

Alternativer